Superalloy InconelX-750/ UNS N07750/ AlloyX-750 Bututu mara kyau, Sheet, Waya
Samfuran Samfura
Bututu mara nauyi, Faranti, Sanda, Forgings, Fasteners, Kayan aikin bututu
Ka'idojin samarwa
| Samfura | ASTM |
| Bars da Forgings | B637 |
Haɗin Sinadari
| % | Ni | Cr | Fe | C | Mn | Si | S | Ti | Nb+Ta | Al | Co | Cu |
| Min | 70.0
| 14.0 | 5.0 |
|
|
|
| 2.25 | 0.70 | 0.40 |
|
|
| Max | 17.0 | 9.0 | 0.08 | 1.00 | 0.50 | 0.010 | 2.75 | 1.20 | 1.00 | 1.00 | 0.50 |
Abubuwan Jiki
| Yawan yawa | 8.28 g/cm 3 |
| Narkewa | 1393-1427 ℃ |
Inconel X-750 Features
Inconel X-750 alloy galibi shine superalloy na tushen nickel wanda aka ƙarfafa shekaru tare da γ[Ni3(Al, Ti, Nb)] lokaci.Yana yana da kyau lalata juriya da hadawan abu da iskar shaka juriya a kasa 980 ℃, kuma a kasa 800 ℃ Yana yana da high lalata juriya.Yana da kyakkyawan juriya na annashuwa ƙasa da 540 ° C, kazalika da ingantaccen tsari da walƙiya.An fi amfani da wannan gami don kera injinan jirgin da ke aiki ƙasa da 800 ° C kuma suna buƙatar ƙarfi mai ƙarfi..Hakanan za'a iya amfani da maɓuɓɓugan ruwa don kera injin turbin turbine da sauran sassa, kamar faranti, tarkace, sanduna, jabu, zobe, wayoyi, bututu, da sauransu.
Inconel X-750 Tsarin Maganin Zafi
The bayani zafi magani tsarin for faranti, tube da bututu a cikin wadata jihar ne 980 ℃ ± 15 ℃, iska sanyaya.Don tsarin kula da zafi na tsaka-tsaki na kayan aiki da sassa, ana iya zaɓar waɗannan matakai don maganin zafi.
Annealing: 955 ~ 1010 ℃, sanyaya ruwa.
Annealing na welded sassa kafin waldi: 980 ℃, 1h.
Danniya taimako annealing na welded sassa: 900 ℃, moisturizing for 2h.
Stress taimako annealing: 885 ± 15 ℃, 24h, iska sanyaya.
Inconel X-750 Akwai Iri da Ƙididdiga
Ana iya ba da sanduna, ƙirƙira, zobe, zanen gado mai zafi, zanen gado mai sanyi, tubes, tubes da wayoyi masu girma dabam dabam.
Gabaɗaya ana ba da faranti da tsiri bayan zafi ko sanyi birgima, shafewa ko bayani, pickling da goge baki.
Ana iya ba da sanduna, ƙirƙira da zobe a cikin ƙirƙira ko yanayin birgima mai zafi;Hakanan za'a iya ba da su a cikin maganin warwarewa bayan ƙirƙira;Ana iya ba da sanduna bayan bayani kuma a goge ko juya, kuma ana iya ba da su cikin sanyi lokacin da oda ya buƙaci Ja da wuri.
Ana iya ba da waya a cikin m yanayin bayani;don waya tare da diamita mara kyau ko kauri a ƙasa da 6.35mm, yana iya zama ingantaccen bayani kuma ana ba da shi tare da nakasar zane mai sanyi na 50% zuwa 65%;diamita mara kyau ko tsayin gefen ya fi 6.35mm.Waya, bayan maganin maganin, ana ba da shi tare da nakasar sanyi mai sanyi wanda bai gaza 30% ba.Don wayoyi masu diamita na ƙididdiga ko tsayin gefen da bai wuce 0.65mm ba, ana iya kawo su tare da nakasar zane mai sanyi wanda bai gaza 15% ba bayan jiyya na bayani kamar yadda ake buƙata.
Inconel X-750 Yankunan Aikace-aikace
Ana amfani da alloy ɗin don kera maɓuɓɓugan ganye da maɓuɓɓugan ruwa tare da buƙatun ƙarfin ƙarfi da juriya ga injin injin da ke aiki ƙasa da 800 ° C.Hakanan za'a iya amfani dashi don yin sassa kamar injin turbine.Akwai nau'ikan nau'ikan takarda, tsiri, mashaya, ƙirƙira, zobe, waya da bututu.
